NATIONALLY-DEFINED VALUES - FOCUS AREA

FOCUS AREAS APPLICABLE TO FCI EVALUATIONS

Code	Name	Description
BIF	Boiler/Industrial Furnace	Inspection focused on compliance with regulatory requirements for boilers and industrial furnaces.
CAR	Corrective Action/Remediation Oversight	Inspection focused on the oversight of corrective action or State remediation activities. Use this code only when the oversight does not represent an evaluation of the site's compliance with the corrective action requirements present in a permit or order (definition of CAO Evaluation Type).
CCI	Subpart CC Inspection	Inspection focused on compliance with air emission standards for tanks, surface impoundments, and containers as covered in 40 CFR 264 and 265, subparts CC.
CFI	Commercial Facility Inspection	Focused inspection at a commercial facility (i.e., site covered under the EPA Off-Site Policy) that does not constitute a CEI.
CPC	Closure/Post-Closure Inspection	Inspection focused on oversight of closure/post-closure activities, including certification of closure/post-closure.
DOS	Definition of Solid Waste	Inspection to verify information related to variance requests, delisting, solid/hazardous waste determination, speculative accumulation, etc.
ECM	Expanded Compliance Monitoring	On-site inspection activities that fall under the expanded definition of compliance monitoring in the RCRA Compliance Monitoring Strategy (CMS).
EMR	Emergency Response Activity	RCRA activity related to emergency response and subsequent clean-up.
FAI	Financial Assurance Inspection	Inspection to evaluate regulatory compliance with financial assurance requirements.
IEC	Institutional and/or Engineering Control Implementation Evaluated	Inspection in conjunction with another evaluation where the institutional and/or engineering control implementation at the facility was evaluated.
IEI	Import/Export Inspection	Inspection to evaluate regulatory compliance for hazardous waste imports and exports.
INC	Hazardous Waste Incinerator Inspection	Inspection/observation of other incinerator activities.
ISI	Inactive Site Inspection	Inspection to verify the status of a site. This code should only be used when the site's status was verified as inactive.
LDR	Land Ban Restrictions	Inspection focused on compliance with the land ban restrictions.
PTB	Performance Test (Trial Burn)	Inspection to evaluate trial burn performance.
PTX	Performance Test (Subpart X)	Inspection to evaluate performance under Subpart X requirements.
RTI	Remote Transporter Inspection	Inspection of a transporter's vehicle and associated manifesting documentation from a remote location (i.e., in transit).
THI	TSD HWMU Inspection	Compliance monitoring inspection focused on specific regulatory requirements of Hazardous Waste Management Units (tanks, surface impoundments, drip pads, etc.).
UIC	Underground Injection Control	Evaluation of compliance with underground injection control requirements.
UOI	Used Oil Inspection	Inspection focused on compliance with the Used Oil regulations as covered by 40 CFR 279.
UWR	Universal Waste Rule Inspection	Inspection focused on compliance with the Universal Waste Rule as covered by 40 CFR 273.

FOCUS AREAS APPLICABLE TO NRR EVALUATIONS

Code	Name	Description
BRR	Biennial/Annual Report Review	Review focused on Biennial/Annual report.
CDR	Corrective Action Documentation Review	Review focused on documentation associated with the corrective action activities occurring at the facility.
GDR	Groundwater Documentation Review	Review focused on documentation associated with groundwater.
MER	Manifest/Exception Report Review	Review focused on manifests associated with the handler.
OCM	Off-site Compliance Monitoring	Reviews information that is sufficiently detailed to form a reasonable view of a facility's compliance status with respect to a requirement, without entering the facility.
SDR	Sampling Data/Waste Determination Review	Review focused on documentation associated with sampling data and/or waste determination.

LEGACY VALUES - FOCUS AREA

Code	Name	Description
V3	Conversion to Version 3	This value is used only in the conv